Open hatch fully box/ double skinned ide class 1A Geared, Tween-decker convertible into Single-decker. Lakes/ Grain/ CO2 fitted.
Table of contents
|Main particulars||Tank capacities|
|Holds/hatches||Fuel oil specification|
|Shipyard||Hudong-Zhonghua Shipbuilding Group Co. Ltd.|
|Class notations||+100A1, +LMC, UMS, NAV1, Ice Class A1, IWS, LI|
|Ice class||Finnish /Swedish 1A|
|Port of registry||Delfzijl|
|DWCC (summer)||19.500 ton|
|Length over all||172,28 m|
|Breadth over all||21,49 m|
|Draughts||Summer: 9,382 m, Tropical: 9,582 m, Winter: 9,178 m|
|Air draft (in Ballast)||35,85|
|Distance WL-HC in ballast||abt. 10,5 m|
|Total cubic feet capacity||928.414 m3 grain/bale|
2 Holds/ 2 Hatches. Both types are: Fully open hatch - no understow. Fully box and double skinned. Fully square - exept box structures due to vessel's outer shape.
|Dimensions||55,42 x 17,75 x 13,5|
|Hatch||55,42 x 17,75|
|Dimensions||58,68 x 17,75 x 13,5|
|Hatch||58,68 x 17,75|
MacGregor Navire Hydraulic steel pontoon hatches
Air chantes per hour basis empty holds: 12 x in hold 1, 8 x in hold 2. Both holds fitted with dehumidifier system, consisting of 4 dehumidifier units.
The vessel is equipped with full tween-deck, consisting of loose tween-deck pontoons of each:
Tweendeck sizes: No. 1 9,90m x 3,22m x 0,90m weight abt. 6 tons No. 2 + 3 12,57m x 6,48m x 0,90m weight abt. 25 tons No. 4 - 18 17,65m x 6,48m x 0,90m weight abt. 33 tons
Tween-decks can be used as vertical bulkheads at every 20 ft interval.
Strenghts uniform TEU / FEU Max perssure tanktop 20,00 mt/sqm xx / xx mt (OSHA) (Pending approval of container Securing Manu al) xx / xx mt (non OSHA) Max pressure tweendeck 4,00 mt/sqm -- / -- Max pressure weatherdeck 1,75 mt/sqm 50 / 60 mt
4 cranes fixed on portside. Each with a capacity of 60 mts at a reach of upto 16 m Or a capacity of 40 mts at a reach upto 28 m.
The cranes can be combined to up to 120 mts in both holds but not the entire holds/ hatches can be served with this maxi mum lifting capacity. Free distance between the cranes is 31 meters. Vessel is fitted with lifting beam (weight abt. 10 tons).
|Water ballast capacity||6.644 m3|
|Fresh water||281 m3|
14.00 knots - 20 mts/day 14,50 knots - 21 mts/day 15,00 knots - 23 mts/day
These figures are about and based on 7,60 m draught, clean bottom, even keel, deep and currentless waters, calm sea and max. windforce Beaufort 2 /Douglas 2 and maximum sea temperature 28/29 degrees Celsius, and shaft generator connected.
Consumption in port Gear working 4,0 mts MGO Idle 1,4 mts MGO
For manoeuvring and navigation in port / narrow water and during slow steaming at sea vessel burns MGO.
Fuel oil specification
HFO as per ISO 8217:2010 RMG 380. MGO as per ISO 8217:2010 DMA. Within: ECA Area t/c operation to be responsible for sulphur limit compliance.
|Main engine||Wartsila 6L46F, 7500 kW at 600 RPM|
|Propeller||Wärtsilä / Lips, 4 blades, 4.800mm|
|Bow thruster||750 kW|