||Hudong-Zhonghua Shipbuilding Group Co. Ltd.
||100 A1 Strengthened for Heavy Cargoes and Hold may be Empty Container Cargoes in all Holds, on Upper Deck and on all Hatch Covers, ShipRight ACS(B), +IWS, LI, ICE CLASS 1A fs at a draught of 9,535m , +LMC, UMS, NAV1
||Finnish /Swedish 1A
|Port of registry
|Length over all
|Breadth over all
|Air draft (in Ballast)
|Distance WL-HC in ballast
|Total cubic feet capacity
||928414 ft3 grain/bale
2 Holds/ 2 Hatches. Both types are: Fully open hatch - no understow. Fully box and double skinned. Fully square - exept box structures due to vessel's outer shape. Vessel is equipped with MacGregor navire hydraulic steel pontoon hatches.
||55.42 x 17.75 x 13.5
||55.42 x 17.75
||58.68 x 17.75 x 13.5
||58.68 x 17.75
Air chantes per hour basis empty holds: 12 x in hold 1, 8 x in hold 2. Both holds fitted with dehumidifier system, consisting of 4 dehumidifier units.
The vessel is equipped with full tween-deck, consisting of loose tween-deck pontoons of each: Tweendeck sizes: No. 1 9,90m x 3,22m x 0,90m weight abt. 6 tons No. 2 + 3 12,57m x 6,48m x 0,90m weight abt. 25 tons No. 4 - 18 17,65m x 6,48m x 0,90m weight abt. 33 tons Tween-decks can be used as vertical bulkheads at every 20 ft interval. Strenghts uniform TEU / FEU Max perssure tanktop 20,00 mt/sqm xx / xx mt (OSHA) (Pending approval of container Securing Manu al) xx / xx mt (non OSHA) Max pressure tweendeck 4,00 mt/sqm -- / -- Max pressure weatherdeck 1,75 mt/sqm 50 / 60 mt
|Water ballast capacity
14,0 knots - 20 mts/day 14,5 knots - 21 mts/day 15,0 knots - 23 mts/day These figures are about and based on 7,60 m draught, clean bottom, even keel, deep and currentless waters, calm sea and max. windforce Beaufort 2 /Douglas 2 and maximum sea temperature 28/29 degrees Celsius, and shaft generator connected. Consumption in port 3,0 mts MGO Gear working/ idle 1,4 mts MGO For manoeuvring and navigation in port/narrow water and during slow steaming at sea vessel burns MGO.
Fuel oil specification
HFO as per ISO 8217:2010 RMG 380. MGO as per ISO 8217:2010 DMA. Within: ECA Area t/c operation to be responsible for sulphur limit compliance.
||Wartsila 6L46F , 7500 kW at 600 RPM
||Wärtsilä / Lips, 4 blades, 4.800mm