Delfborg

Open hatch, fully box, double skinned, Single-decker (incl. 2 movable bulkheads that can be used als Tween-deck) Lakes / Grain / CO2 fitted.

Details

General

Call sign P.H.M.R.
IMO number 9393266
Built 2007
Shipyard Ferus Smit Leer GmbH
Classification Lloyd's Register
Class notations +100A1 Strengthened for Heavy Cargoes, Container Cargoes in all Holds and on all Hatch Covers, Ice Class 1A FS, +LMC, UMS
Ice class Finnish /Swedish 1A
Port of registry Delfzijl
Flag Dutch

Main particulars

DWCC (summer) 6400 ton
Length over all 110.78 m
Breadth over all 14 m
Draughts 6.52
TPC SSW 14.7
Air draft (in Ballast) 25
Depth (moulded) 8.13
Distance WL-HC in ballast 6.5
GT 3990
NT 2214

Cargo capacities

Total cubic feet capacity 278042 ft3 grain/bale

Holds/hatches

2 Holds/ 2 Hatches, both types are: fully open hatch - no understow. Fully box and double skinned (except narrowing for e/aft. part) Cement holes: Position of cement holes in the following hatches: Starboard side: hatch no. 4 - 7 and 12, abt. 1,40 m of the centreline Port side: hatch no. 1 - 5 and 10, abt. 1,40 m of the centreline. Cement holes by dm: Outside 58 cm Inside 47 cm Each hole has 12 bolts M16x30

Hold #1

Dimensions 27.58 x 11.47 x 9
Luiken 27.58 x 11.47

Hold #2

Dimensions 50.88 x 11.47 x 9
Luiken 50.88 x 11.47

Electrical ventilaton

Hold ventilation abt. 6 air chagnes per hour basis empty holds. Both holds fitted with dehumidifier system. The ventilation trunks are not removable.

Tank capacities

HFO 379.2 m3
MGO 44.8 m3
Water ballast capacity 2599 m3
Fresh water 45 m3

Speed/consumption

11 knots - 11 mts/day These figures are about and based on 6,10 m draft, clean bottom, even keel, deep and currentless waters, calm sea and ma x wind force Beaufort 2/ Douglas 2 and maximum sea temperature 28/29 degrees Celsius, and shaft generator connected. Consumption in port 0,7 mts/day MGO For manoeuvring and navigation in port/narrow water vessel burns MGO.

Fuel oil specification

VLSFO 0,5% ISO 8217:2010. MGO DMA 0,1% ISO 8217:2010. Within: ECA Area t/c operation to be responsible for sulphur limit compliance.

Engines

Main engine MAK 8M25 , 2640 kW at 750 RPM
Reduction gear
Propeller
Bow thruster 340 kW

Contact us

We are happy to help!

Contact